Pasta Processed from Sprout Damaged Grain
Germination (sprouting) of grain before harvesting can be a problem when rain and cool weather prevent or slow down normal harvesting operations.
Pasta manufacturers are particularly sensitive to using semolina milled from sprouted durum wheat in their pasta processing operations since it can affect end product quality.
Several studies have been conducted of the problems of sprouting terms of pasta quality.
Some general conclusions from those studies indicate that test weight, kernel distribution, protein content, milling performance, pasta color, and cooking quality were not adversely affected by increasing sprout damage.
The only major adverse effect appeared to be higher semolina speck counts and spaghetti shelf stability.
It was noted that sprout damage levels of 4.0% or higher (Falling Numbers of 120 or less) resulted in pasta products having high potential for checking and cracking in storage.
Commercial manufacturers of spaghetti are concerned not only with the problems mentioned above but also with the tendency of spaghetti processed from sprout-damage grain to stretch and fall off the rods during drying.
Because of such concerns a number of US pasta manufacturers will not process pasta form semolina with Falling Numbers less than 300.
Result indicate that pasta can be processed utilizing semolina with Falling Numbers of 250 without any apparent problems, so commercial manufacturer’s use of semolina with values of 350 and higher provided a large margin of safety.
Pasta Processed from Sprout Damaged Grain
Just another blog about food processing and the important of food processing. It is about the conversion of raw materials or ingredients into the consumer product. Food processing also can be defined as the branch of manufacturing that starts with raw animal, vegetable, or marine materials and transforms them into intermediate foods stuff or edible products through the application of labor, machinery, energy, and scientific knowledge.
Monday, July 27, 2009
Most Popular Articles
-
Bactofugation is a process used to eliminate bacteria contained in milk using centrifugal force. It is a special form of separation of micro...
-
Expeller cocoa bitter is the fat prepared by the expeller process from cocoa beans singly or in combination with cocoa nib, cocoa mass, coco...
-
Brie, a cheese that is surface ripened by mold, is very similar to Camembert. Differences exist, however, in the internal ripening and in th...
-
Panning is an artisan chocolate-making method that requires slowly pouring chocolate over a round tumbling pan full of nuts, fruits, or any ...
-
Butter is essentially milk fat made from milk, dahi (curd) or cream by agitating or shaking it until the fat separates as semisolid mass fro...